Epson Workforce ET 4750 Ecotank Setup

 Epson ET 4750 Unboxing Setup

Take care while handling the Epson ET 4750 printer carton. Open the carton and take out the printer accessories. Keep aside the warranty card and the ink cartridges. Make changes to the printer settings on the printer's control panel. Put the manufacturer approved paper and ink in the appropriate slots of the printer. Proceed to print after installing the printer driver on your computer.


Epson ET 4750 Setup

  1. Unpack the Epson Workforce ET 4750 Ecotank printer from the carton and take out the protective materials.
  2. Pull open the Ink Tank Cover and loosen the cap of the black ink tank for Epson ET 4750 Setup.
  3. Unwrap the ink bottle's packaging and remove its lid and seal.
  4. Invert the ink bottle into the tank and fill it until the marked line.
  5. Connect the printer’s power cable into an electrical outlet for Epson ET 4750 Setup.
  6. Switch the printer on by pressing the Power button.
  7. Set English as your language. Hold down the OK button for 3 seconds.
  8. The screen displays many instructions which are to be clearly found.
  9. The initialization process takes up to 10 minutes.
  10. Load A4 sized paper into the feeder and adjust the width guides.
  11. Select the required paper settings.
  12. Print a nozzle check pattern to see if the machine is working properly after Epson ET 4750 Setup.
  13. Printing can be done once the driver installation is completed.

Comments

Popular posts from this blog

Epson WF 2540 Scan Setup

How to Create a Epson Connect Account?

Epson XP 440 Scan To Email